KERB-KONUS Self-Tapping Insert Driver M2.5–M6 Size:3*0.5 Reference - [Icm] rated short-circuit

Reference - [Icm] rated short-circuit marking capacity 105 kA at 220/250 V AC 50/60 Hz

Specification item model symbol Specification information With auto switch D With auto switch form - pneumatic type Mounting support type A Bottom installation type tube inner diameter 32 Bore size 32mm cylinder stroke 25 cylinder stroke 25mm dual stroke mark - No dual stroke mark cylinder stroke 2 - Cylinder stroke 2 None cushion - rubber cushion Rod end screw shape - rod end male thread rod end bracket - no metal fittings auto switch - Without auto switch Auto switch additional symbol - 2 with or without Custom made specifications - standard

00 kN 274000 lbf

Specification item model symbol Specification information Piping type - standard type tube inner diameter 25 tube inner diameter 25mm Types of port screws - Rc cylinder stroke 1000 Cylinder stroke 1000mm With/without switch rail - Attaching the switch rail auto switch - ø6 to ø15

0 32 60 180 2 GENERAL HSSE2480350 35 R17

KERB-KONUS Self-Tapping Insert Driver M2.5–M6 Size:3*0.5 Reference - [Icm] rated short-circuitKERB KONUS Self Tapping Insert Driver M2. 5M6 An insertion tool engages the tang of the insert and winds it into the tapped hole to the correct depth below the surface. Available Sizes 3*0. 5 4*0. 7 5*0. 8 6*1. 0 2. 5*0. 45 Key Features One tool per thread size Sets the insert below the face so the tang can be snapped off Specifications Size 3 0. 5 Square Drive (mm) 6. 3 Specifications shown are for the base model; values vary by size. Contact us if